Water Damage Service
Containment, HEPA filtration, safe removal and clearance verification — mold handled by the book, not with a bottle of bleach.
Mold is not a cleaning problem, it is a moisture problem. Wherever water sat long enough — behind a shower wall, under a sink, inside drywall after a leak — mold follows within 24 to 48 hours. And spraying bleach on it, the internet's favorite fix, often makes it worse by scattering spores while leaving the moisture and the roots behind.
We remediate mold the way the industry standard requires: find and fix the moisture source, contain the area so spores do not spread, remove affected materials under HEPA filtration, treat what remains, and verify the space is clean before we call it done.
If you can see mold, smell that damp musty odor, or you have had a water leak that was not dried properly, call (866) 688-0301 for an inspection. Catching it early keeps a small containment from becoming a whole-room tear-out.
We inspect the affected areas, identify the moisture source feeding the mold, and determine the extent — because remediating without fixing the water source just guarantees it comes back.
We seal the work area with plastic sheeting and negative air pressure so spores cannot travel to clean parts of your home while we work.
Air scrubbers with HEPA filters run throughout the job. We remove mold-affected porous materials (drywall, insulation, carpet) that cannot be saved and HEPA-vacuum and treat the surfaces that can.
We apply antimicrobial treatment, dry the area completely so mold has no moisture to return to, and verify the space is clean — with clearance testing where appropriate — before rebuilding.
The IICRC standard puts initial mold growth at 24 to 48 hours after water exposure. In Tempe that clock is not slowed by the desert — a wet wall cavity or a soaked cabinet base is a warm, dark, humid pocket regardless of what the outdoor humidity reads. That is why we push so hard on fast drying after any leak. Mold after a water loss is preventable when the drying is done right and done quickly.
Bleach is designed for hard, non-porous surfaces. On porous materials like drywall and wood, the water in bleach soaks in while the mold roots survive underneath, and scrubbing aerosolizes spores that then settle elsewhere. Proper remediation contains the area, removes what cannot be saved, and treats what remains under controlled conditions. It is a protocol, not a spray bottle.
Every loss is different, so we give you an itemized estimate before work begins — never a number pulled from the air. These are the factors that move the price:
Typically within 24–48 hours of the material staying wet — the IICRC industry benchmark. Arizona's dry outdoor air does not protect a sealed-up wet wall cavity, which is why fast, thorough drying after any leak is the best mold prevention there is.
For a few square inches on a hard surface like tile, careful cleaning can be enough. But bleach on porous materials like drywall or wood leaves the roots and adds moisture, and disturbing larger growth spreads spores. Anything beyond a small patch — or any mold tied to a past leak — should be contained and removed properly.
Common signs are a musty smell with no visible source, past water damage that was not dried, staining that bleeds through paint, and allergy-type symptoms that improve when you leave home. We can inspect and use moisture readings to confirm before opening anything up.
Mold prevention is built into how we dry every water loss. When growth has already started, remediation is its own controlled process — containment, removal, treatment, clearance — and we handle that in-house too, so you are not hiring a separate company.
Had a leak that was never dried right? Mold can start in 24 to 48 hours, even here — we inspect, take moisture readings, and stop it before it spreads.
Learn moreWe dry your home to the core — walls, slabs, subfloors and attics — with a calculated drying plan and daily moisture readings, not guesswork.
Learn more
Arizona's dry air does not protect you from mold; it just makes people underestimate it. Mold can start within 24 to 48 hours of a leak, and Tempe's heat only speeds the clock. Here is the real timeline.
Mold remediation quotes range from a few hundred dollars to five figures for a reason. Here are the real cost drivers in Scottsdale and Tempe — size, location, containment, testing — and why bleach is the most expensive shortcut.
We bring mold remediation to homes and businesses across the Valley — here are the areas we're called to most.
Our Tempe crew answers 24/7 and aims to be at your door within the hour. Get extraction and drying started before the mold clock runs out.
24/7 Emergency Service · 60 minutes response · Licensed & Insured
